Product Details:
Minimum Order Quantity | 1 Piece |
Switch Type | Weatherproof |
Current Rating | 16 Amp |
Brand | Smartsaa |
Model Name/Number | PC BS ESM |
Material/Body | Metal |
Usage/Application | Conveyor stopping in case of emergency |
Power/Voltage | 440 V |
SMARTsaa offers variety of Safety Switches for use on Conveyors. We manufacture and export Safety Switches like Pull Cord switch, Belt Sway Switch, Heavy Duty Limit Switch, Electronic Speed Switch, Belt Loading Monitor, Chute Jam Detector, Belt Damage Detector, Boot Level Detector, De-Interlocking Switch for protection and monitoring of conveyer belt and other machinery.
PULL CORD SWITCH Series PC:t is a rope operated emergency switch. It is provided with operating handle fitted with spring steel rings at both ends for fixing the rope. Pull cord switch is mounted on the walkway side of conveyer belt, preferably at about every 30 meters length. Rope is tied to the end rings of the handle. When the rope is pulled from any side, the switch is operated. The switch remains in the operated condition until and unless it is manually brought to normal position.
BELT- SWAY SWITCH Series BS:
This switch allows smooth running of the conveyer and protects it from damages by over swaying which can occur due to uneven loading of material, worn out idler roller bearings etc. The belt sway is generally mounted on both sides and near the edge of conveyer belt. A small gap is provided between contact roller and the belt edge to allow normal running of the belt with acceptable tolerance. When swaying exceeds normal limit, the belt edge pushes the contact roller, which drives the switch and operates the contacts. Switch resets automatically when the belt resumes normal running.
HEAVY DUTY LIMIT SWITCH Series HDLS:
SMARtsaa offers Heavy Duty Limit Switch for use on heavy machines. These switches give position feedback by operation of contact. The application includes position sensing of crane, stacker reclaimer, loader etc. The robust design makes its use on heavy machinery.
ELECTRONIC SPEED SWITCH – MONITOR Series ESM :
This switch is used to monitor speed of conveyers, crushers, rolling mills, agitators, mixers, stirrers, screw conveyers and other industrial machinery. The device actuates relay contacts at preset speed. Using these contacts, desired control action such as zero speed protection/ under speed protection/ over speed protection can be achieved.
BELT LOADING MONITOR Series BLM:
Simple and robust device to detect the loading of material on he belt conveyor.
CHUTE JAM DETECTOR:
Various models are offered to detect chute jamming. Following are few models.
1. Chute Jam / Block Switch: RF Admittance Disc Probe: Series: RFLS D
Suitable for sensing material jamming in a compact chute. Ideal when you want to mount the sensor at the bottom of the hopper.
2. Chute Jam / Block switch: RF Admittance Rod Probe: Series RFLS R
The probe is to be inserted in the walls of hopper at required level point. When material level rises and touches the probe the contact is actuated.
3. Chute Jam / Block switch: RF Admittance Rope Probe: Series RFLS C
The probe is to be hanged from the top in the hopper. T
4. Chute Jam / Block switch: Tilt Probe: Series TLS 602
The TILT probe is to be hanged from the top in the hopper or supported on the walls of hopper at required locations.
DAMAGE BELT DETECTOR Series DBD :
Belt damage detector detects and give early warning of belt damage. Damaged belt detector is to be mounted in pairs, positioned on either side of the belt.
We offer Best Price for Safety Switches for Conveyorswith fast delivery SMARTsaa Safety Switches for ConveyorsPrice is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | SMARTsaa |
Material/Body | Metal |
Rated Insulation Voltage | 1500 V |
Current Rating | 16 Amp |
Switch Type | Weatherproof |
Usage/Application | Conveyor stopping in case of emergency |
Power/Voltage | 440 V |
SMARTsaa offers variety of Safety Switches for use on Conveyors. We manufacture and export Safety Switches like Pull Cord switch, Belt Sway Switch, Heavy Duty Limit Switch, Electronic Speed Switch, Belt Loading Monitor, Chute Jam Detector, Belt Damage Detector, Boot Level Detector, De-Interlocking Switch for protection and monitoring of conveyer belt and other machinery.
PULL CORD SWITCH Series PC:t is a rope operated emergency switch. It is provided with operating handle fitted with spring steel rings at both ends for fixing the rope. Pull cord switch is mounted on the walkway side of conveyer belt, preferably at about every 30 meters length. Rope is tied to the end rings of the handle. When the rope is pulled from any side, the switch is operated. The switch remains in the operated condition until and unless it is manually brought to normal position.
BELT- SWAY SWITCH Series BS:
This switch allows smooth running of the conveyer and protects it from damages by over swaying which can occur due to uneven loading of material, worn out idler roller bearings etc. The belt sway is generally mounted on both sides and near the edge of conveyer belt. A small gap is provided between contact roller and the belt edge to allow normal running of the belt with acceptable tolerance. When swaying exceeds normal limit, the belt edge pushes the contact roller, which drives the switch and operates the contacts. Switch resets automatically when the belt resumes normal running.
HEAVY DUTY LIMIT SWITCH Series HDLS:
SMARtsaa offers Heavy Duty Limit Switch for use on heavy machines. These switches give position feedback by operation of contact. The application includes position sensing of crane, stacker reclaimer, loader etc. The robust design makes its use on heavy machinery.
ELECTRONIC SPEED SWITCH – MONITOR Series ESM :
This switch is used to monitor speed of conveyers, crushers, rolling mills, agitators, mixers, stirrers, screw conveyers and other industrial machinery. The device actuates relay contacts at preset speed. Using these contacts, desired control action such as zero speed protection/ under speed protection/ over speed protection can be achieved.
BELT LOADING MONITOR Series BLM:
Simple and robust device to detect the loading of material on he belt conveyor.
CHUTE JAM DETECTOR:
Various models are offered to detect chute jamming. Following are few models.
1. Chute Jam / Block Switch: RF Admittance Disc Probe: Series: RFLS D
Suitable for sensing material jamming in a compact chute. Ideal when you want to mount the sensor at the bottom of the hopper.
2. Chute Jam / Block switch: RF Admittance Rod Probe: Series RFLS R
The probe is to be inserted in the walls of hopper at required level point. When material level rises and touches the probe the contact is actuated.
3. Chute Jam / Block switch: RF Admittance Rope Probe: Series RFLS C
The probe is to be hanged from the top in the hopper. T
4. Chute Jam / Block switch: Tilt Probe: Series TLS 602
The TILT probe is to be hanged from the top in the hopper or supported on the walls of hopper at required locations.
DAMAGE BELT DETECTOR Series DBD :
Belt damage detector detects and give early warning of belt damage. Damaged belt detector is to be mounted in pairs, positioned on either side of the belt.
We offer Best Price for Safety Switches for Conveyorswith fast delivery SMARTsaa Safety Switches for ConveyorsPrice is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | SMARTsaa |
Material/Body | Metal |
Rated Insulation Voltage | 1500 V |
Power/Voltage | 230 |
Current Rating | 16 Amp |
Switch Type | Weatherproof |
Usage/Application | Conveyor Stopping in case of emmergency |
Model Name/Number | DBD |
Features | Industrial, Heavy Duty |
Certification | Enclosure Grade |
Country of Origin | Made in India |
SMARTsaa offers variety of Safety Switches for use on Conveyors. We manufacture and export Safety Switches like Pull Cord switch, Belt Sway Switch, Heavy Duty Limit Switch, Electronic Speed Switch, Belt Loading Monitor, Chute Jam Detector, Belt Damage Detector, Boot Level Detector, De-Interlocking Switch for protection and monitoring of conveyer belt and other machinery.
PULL CORD SWITCH Series PC:t is a rope operated emergency switch. It is provided with operating handle fitted with spring steel rings at both ends for fixing the rope. Pull cord switch is mounted on the walkway side of conveyer belt, preferably at about every 30 meters length. Rope is tied to the end rings of the handle. When the rope is pulled from any side, the switch is operated. The switch remains in the operated condition until and unless it is manually brought to normal position.
BELT- SWAY SWITCH Series BS:
This switch allows smooth running of the conveyer and protects it from damages by over swaying which can occur due to uneven loading of material, worn out idler roller bearings etc. The belt sway is generally mounted on both sides and near the edge of conveyer belt. A small gap is provided between contact roller and the belt edge to allow normal running of the belt with acceptable tolerance. When swaying exceeds normal limit, the belt edge pushes the contact roller, which drives the switch and operates the contacts. Switch resets automatically when the belt resumes normal running.
HEAVY DUTY LIMIT SWITCH Series HDLS:
SMARtsaa offers Heavy Duty Limit Switch for use on heavy machines. These switches give position feedback by operation of contact. The application includes position sensing of crane, stacker reclaimer, loader etc. The robust design makes its use on heavy machinery.
ELECTRONIC SPEED SWITCH – MONITOR Series ESM :
This switch is used to monitor speed of conveyers, crushers, rolling mills, agitators, mixers, stirrers, screw conveyers and other industrial machinery. The device actuates relay contacts at preset speed. Using these contacts, desired control action such as zero speed protection/ under speed protection/ over speed protection can be achieved.
BELT LOADING MONITOR Series BLM:
Simple and robust device to detect the loading of material on he belt conveyor.
CHUTE JAM DETECTOR:
Various models are offered to detect chute jamming. Following are few models.
1. Chute Jam / Block Switch: RF Admittance Disc Probe: Series: RFLS D
Suitable for sensing material jamming in a compact chute. Ideal when you want to mount the sensor at the bottom of the hopper.
2. Chute Jam / Block switch: RF Admittance Rod Probe: Series RFLS R
The probe is to be inserted in the walls of hopper at required level point. When material level rises and touches the probe the contact is actuated.
3. Chute Jam / Block switch: RF Admittance Rope Probe: Series RFLS C
The probe is to be hanged from the top in the hopper. T
4. Chute Jam / Block switch: Tilt Probe: Series TLS 602
The TILT probe is to be hanged from the top in the hopper or supported on the walls of hopper at required locations.
DAMAGE BELT DETECTOR Series DBD :
Belt damage detector detects and give early warning of belt damage. Damaged belt detector is to be mounted in pairs, positioned on either side of the belt.
BOOT LEVEL DETECTOR Series : RFLS R
Designed to sense material in a bin of bucket elevator. It gives warning when buckets are running empty. It can also be used to detect spillage level in bucket elevator.
We offer Best Price for Safety Switches for Conveyorswith fast delivery SMARTsaa Safety Switches for ConveyorsPrice is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | TRS A |
Brand | SMARTsaa |
Dial Shape | Rectangular |
Features | Most advanced system |
Power Source | 230 V AC |
Country of Origin | Made in India |
SMARTsaa manufactures and export Belt Watch System which is Unique and proven product for large material handling plants where multiple numbers of switches are connected in series.
Belt Watch System is developed to give exact indication of operated switch in control room
ADVANTAGES:
Most advanced method of locating operated Switch with Instant indication, & tripping
Time required to search for operated switch is eliminated.
Communication through two core cable only, less cable cost and cable laying cost
Interchangeable Communicating card
RS 232 / RS-485 MODBUS O/P, PLC interface for fault logging.
Miniature size of communication cards Fail safe circuit
Specially suitable for high length conveyors
Scrolling Display of multiple operated switch
Roll call Feature: Indicates missing of communication card.
General Field problems like: Cable open. Cable short are indicated on Trip Indicator
Redundant O/P: Optional
Trip Indicator: Effective working even if switches are filled with water
Belt Watch System operating principle:
A small communication card is to be wired inside the conventional safety switch. The trip indicator is to be installed in suitable location like control room. When any switch is operated, the location number of operated switch is displayed on the Trip Indicator. The trip indicator is also provided with relay output which can be interlocked with existing relay logic circuit.
Belt Watch System functional description:
Various models are available depending on number of safety switches/ length of belt, number of conveyors, configuration of communication o/p etc. However all models will have following basic features.
When any safety switch is operated, the O/P relay of trip indicator is operated, tripping conveyor instantly. Operated switch number is also displayed and communicated to PLC / DCS as per requirement. All safety features are incorporated along with special features as mentioned below.
To offer you suitable model, please inform us:
Conveyor Number and number of switches on each conveyor
No of loops connected to one Trip Indicator (We recommend grouping of one conveyor to one trip indicator)
Total Length of conveyor
Location of Trip Indicator
Type of O/P required from Trip Indicator: 4-20 Ma, RS 485 MODBUS
To offer you most appropriate system, we require following details
1. Plant Layout informing conveyor numbers and locations
2. No of Belt Sway and Pull Cord Systems on each conveyor
3. No of groups per conveyor (like Belt Sway and Pull Cord) and number of Groups per Trip Indicator
3. Length of conveyor
4. Location of Trip Indicator
5. Location of Panels for multiple trip indicators
6. Make of DCS and communication
7. Type of O/P required from Trip Indicator
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | SMARTsaa |
Material/Body | Metal |
Rated Insulation Voltage | 1500 V |
Current Rating | 16 Amp |
Switch Type | Weatherproof |
Usage/Application | Conveyor Stopping in case of emmergency |
Power/Voltage | 440 V |
Model Name/Number | PC 202 C JB IL |
Pull Cord Switch with Indicating Lamp manufactured and exported by SMARTsaa is designed to provide visible indication of operated switch from distance. The LED Lamp can be viewed from distance for ease of locating the operated switch. 1 NO contact is used to drive lamp our of 2 NO+ 2 NC contact is provided by Pull Cord Switch with Indicating Lamp. Customer need to lay additional 2 core cable for powering indicating lamp along with 2 core for hardwire tripping.
Pull Cord Switch with indicating lamp enables the visual display of the operated switch even from the distance. It is housed in dust and weatherproof cast aluminum enclosure with IP 66 Grade of protection. Sturdy & heavy duty cam-switch with robust contacts is used to give longer service life. Cast aluminum operating handle fitted with spring steel rings at both ends is provided for fixing the rope. The design of the rings gives maximum flexibility in operating condition. Enclosure & handle is epoxy painted to give high corrosion resistance. The switch is designed with manual reset type of mechanism. Pull Cord switch is mounted on the walkway side of the conveyor belt, preferably at about every 20 meters of the length. Rope is tied to the end rings of the handle. When the rope is pulled from any side, the switch is operated. Unless and until the handle is reset to normal position manually, the switch remains in operated condition.
We offer Best Price for PULL CORD SWITCH WITH INDICATING LAMP with fast delivery
SMARTsaa Pull Cord Switch with Indicating Lamp Price is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Smartsaa |
Material/Body | Metal |
Rated Insulation Voltage | 1500 V |
Current Rating | 16 AMP |
Switch Type | Weatherproof |
Usage/Application | Conveyor stopping in case of emergency |
Model Name/Number | PC |
Power/Voltage | 440 V |
Features | Snap Action |
Trigger Cable Maximum Length | 30 Mtrs |
Distance Between Cable Supports | 5 Mtrs |
Utilization Category | Field Mounting, Conveyor Safety |
Operating Temperature | 80 degree |
Ip Rating | IP 65 |
Rated Impulse Withstand Voltage | 1500 V |
Contact Type | Snap Action, 2 NO + 2NC |
Housing Material | Cast Al |
Country of Origin | Made in India |
Emergency Stop Pull Cord Switch manufactured and exported by SMARTsaa is designed to stop the conveyor belt in the case of an emergency. It provides contact operation which can be used for conveyor stopping as well as audio visual alarm. 2 NO+ 2 NC contact is provided by Emergency Stop Pull Cord Switch.
Emergency Stop Pull Cord Switch is housed in dust and weatherproof cast aluminum enclosure with IP 65 Grade of protection. Sturdy & heavy duty cam-switch with robust contacts is used to give longer service life. Handle fitted with spring steel rings at both ends is provided for fixing the rope. The design of the rings gives maximum flexibility in operating condition. Enclosure is epoxy painted to give high corrosion resistance. The switch is designed with manual reset type of mechanism. Pull Cord switch is mounted on the walkway side of the conveyor belt preferably at about every 30 meters of the length. Rope is tied to the end rings of the handle. When the rope is pulled from any side, the switch is operated. Unless and until the handle is reset to normal position manually, the switch remains in operated condition. Hence reliable operation is ensured by Emergency Stop Pull Cord Switch.
Following models are available:
PC 101: Emergency Stop Pull Cord Switch with 1 NO + 1 NC contact
PC 202: Emergency Stop Pull Cord Switch with 2 NO + 2 NC contact
PC 202 RB: Emergency Stop Pull Cord Switch with Reset Button
PC 202 F: Emergency Stop Pull Cord Switch in Flameproof Enclosure
PC HR: Emergency Stop Pull Code Switch with Reset Button for Small Conveyors in automobile plants
SMARTsaa offers Emergency Stop Pull Cord Switch equivalent to:
Schmersal /Telemecanique/Allen Bradley /Schneider/Jayashree / AG & Protocontrol
We offer Best Price for Emergency Stop Pull Cord Switch with fast delivery
All above Emergency Stop Pull Cord Switches are field mounting having IP 65 enclosure, available in various other enclosures materials to suite site conditions:
Available Accessories:
PCW: Pull Cord Switch Rope
TS: Emergency Stop Pull Cord Switch with Terminal Strip inside the switch
JB: Emergency Stop Pull Cord Switch with Junction Box for ease of wiring
MF: Emergency Stop Pull Cord Switch with Mechanical Indication
IL: Emergency Stop Pull Cord Switch with LED Indicating Lamp for location indicator of operated switch
CG: Cable gland for Pull Cord Switch
BP: Pull Cord Switch with Base Plate
PCA : Addressable Pull Cord Switch
SMARTsaa Emergency Stop Pull Cord Switch Price is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Switch Type | Weatherproof |
Current Rating | 16 Amp |
Brand | SMARTsaa |
Model Name/Number | PC 202 |
Power/Voltage | 230 |
Rated Insulation Voltage | 1500 V |
Material/Body | Metal |
Features | Snap Action |
Certification | Enclosure Grade |
Housing Material | Die Cast Al |
Contact Type | Snap Action, 2 NO + 2 NC |
Utilization Category | Field Mounting, Conveyor Safety |
Rated Impulse Withstand Voltage | 1500 V |
Short Circuit Protective Device | NA |
Operating Temperature | 80 degree |
Country of Origin | Made in India |
Pull Switch manufactured and exported by SMARTsaa is designed to stop the conveyor belt in the case of an emergency. It provides contact operation which can be used for conveyor stopping as well as audio visual alarm. 2 NO+ 2 NC contact is provided by Pull Switch.
Heavy Duty Pull Switch is housed in dust and weatherproof cast aluminum enclosure with IP 65 Grade of protection. Sturdy & heavy duty cam-switch with robust contacts is used to give longer service life. Handle fitted with spring steel rings at both ends is provided for fixing the rope. The design of the rings gives maximum flexibility in operating condition. Enclosure is epoxy painted to give high corrosion resistance. The switch is designed with manual reset type of mechanism. Pull Cord switch is mounted on the walkway side of the conveyor belt preferably at about every 30 meters of the length. Rope is tied to the end rings of the handle. When the rope is pulled from any side, the switch is operated. Unless and until the handle is reset to normal position manually, the switch remains in operated condition. Hence reliable operation is ensured by Pull Cord Switch.
Following models are available:
PC 101: Pull Switch with 1 NO + 1 NC contact
PC 202: Pull Switch with 2 NO + 2 NC contact
PC 202 RB: Pull Switch with Reset Button
PC 202 F: Pull Switch in Flameproof Enclosure
PC HR: Pull Switch with Reset Button for Small Conveyors in automobile plants
SMARTsaa offers Pull Switch equivalent to:
Schmersal /Telemecanique/Allen Bradley /Schneider/Jayashree / AG & Protocontrol
We offer Best Price for Pull Switch with fast delivery
All above Pull Switches are field mounting having IP 65 enclosure, available in various other enclosures materials to suite site conditions:
C: Pull Cord Switch in Cast Aluminum enclosure
D: Pull Cord Switch in FRP / DMC / Plastic enclosure
CI: Pull Cord Switch in Cast Iron Enclosure
F: Pull Cord Switch in Flameproof Housing for use in hazardous area
Available Accessories:
PCW: Pull Switch Rope
TS: Pull Switch with Terminal Strip inside the switch
JB: Pull Switch with Junction Box for ease of wiring
MF: Pull Switch with Mechanical Indication
IL: Pull Switch with LED Indicating Lamp for location indicator of operated switch
CG: Cable gland for Pull Switch
BP: Pull Switch with Base Plate
PCA : Addressable Pull Switch
SMARTsaa Pull Switch Price is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Sensor Type | Belt Misalignment |
Material/Body | Metal |
Part Number | BMS |
Brand | Smartsaa |
Rated Insulation Voltage | 1500 V |
Power/Voltage | 230 VAC |
Current Rating | 5 AMP |
Switch Type | Weatherproof |
Model Name/Number | BMS |
Features | Snap Action |
Certification | Enclosure Grade |
Utilization Category | Field Mounting, Conveyor Safety |
Operating Temperature | 80 degree |
Ip Rating | IP 65 |
Rated Impulse Withstand Voltage | 1500 V |
Contact Type | Snap Action, 2 NO + 2 NC, 1 NO + 1 NC |
Housing Material | Cast Al |
Country of Origin | Made in India |
BELT MISALIGNMENT SENSOR manufactured and exported by SMARTsaa is designed to detect tracking and misalignment problems on bucket elevators and conveyors. It consists of Sensor and Control Unit. The sensor is to be mounted such that when a belt misaligns or a pulley moves over and pushes the sensor face, the switch detects the movement and potential free relay contact is actuated in control unit. The relay contact is used to generate alarm and shutdown the machine.
The face of the sensor is made from hardened stainless steel, so that there is virtually no wear when a belt contacts it. The sensor is not affected by dust or material build up and will still work when completely covered by material.
Sensors are normally installed in pairs on opposite sides of the machine. Usually a pair of sensors at each pulley is used, but additional pairs can be installed as required at location where belt misalignment is possible.
SPCIFICATIONS:
Sensor Enclosure: Cast Al (IP 65) with Hardened steel face Safety.
The Sensor can be flange mounted or L Bracket Mounted Type
Control Unit: Cast Al, IP 65
Control Supply: 230 V AC
O/P: 2 NO + 2 NC relay contact rated for 5 Amp
We offer Best Price for Belt Misalignment Switch with fast delivery
SMARTsaa Belt Misalignment Switch Price is affordable and economicalAdditional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Switch Type | Waterproof |
Brand | Smartsaa Instruments (I) Private Limited |
Model Name/Number | Safety Switches for Stone Picker Area |
Material/Body | Metal |
Usage/Application | Industrial |
Country of Origin | Made in India |
SAFETY Switches manufactured and exported by SMARTsaa are designed for use in Stone Picker Area of coal handling plants. These switches provide additional safety to operators working in stone picket area. These switches provides switching operation when:
· The rope connected to operator belt is pulled by accidental falling of operator
· The rope which is tied across the belt conveyor is pulled by operator while traveling on the belt
SPECIAL FEATURES:
· Safety switch designed for low operating force. Switch operates just by small pull of falling operator
· Safety switch ensures the rope is placed at its position and duly tightened
SPCIFICATIONS:
· Safety Pull Cord Switch with added safety feature of rope missing detection
· Rope length: 5 Mtr / 15 Mtr
· Contact arrangement: 1 NO + 1 NC,
· Contact Rating: 10 Amp resistive at 230 V AC
· Cable entry for Junction Box: ¾ inch BSP
Safety Pull Cord Switches are field mounting type cane be used in dusty and seashore environment.
SMARTsaa offers Pull Cord Switch equivalent to:
Schmersal / Telemecanique /Allen Bradley /Schneider
We offer Best Price for Safety Switches for Stone Picker Areawith fast delivery
We also offer Required Accessories forSafety Switches for Stone Picker Area:Like
Pull Cord Cable, Turn Buckle, Wire Rope Thimble (Rope Eye), Pulley, Stay Bolt, spring , Cable Rope Clamp, Bull Dog Clip
SMARTsaaSafety Switches for Stone Picker AreaPrice is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Smartsaa |
Material/Body | Metal |
Rated Insulation Voltage | 1500 V |
Current Rating | 16 AMP |
Switch Type | Weatherproof |
Model Name/Number | SPC1 |
Features | Snap Action |
Certification | Enclosure Grade |
Utilization Category | Field Mounting, Conveyor Safety |
Operating Temperature | 80 degree |
Ip Rating | IP 65 |
Rated Impulse Withstand Voltage | 1500 V |
Contact Type | Snap Action, 2 NO + 2 NC, 1 NO + 1 NC |
Housing Material | Dia Cast Al |
Country of Origin | Made in India |
Machine Guard Safety Switch manufactured and exported by SMARTsaa are designed for use on Critical machines. The switch operates when rope is pulled by operator. The contacts are used for machine tripping / stopping .
The switch operates when:
· Rope is pulled
· The Rope is broken, slack, stolen or missing
· With emergency push button provided on switch is pressed
SPECIAL FEATURES:
· Single sided Pull Cord Switch is designed for rope length of 80 Meters (Usable length 50 Meters)
· Double sided Pull Cord Switch is designed for rope length of 80 Meters each side, total 160 Meters (Usable length 50 meters each side, total 100 Meters)
· Number of switches required at site gets reduced, hence reduced inventory
· Optional Additional Junction with separate terminals for ease of wiring
· Optional LED indicator
· Robust design, totally enclosed metallic enclosure for main switch, IP 67
· Switch can be used for Conveyor Guard Sensor
· The switch can be interfaced with Belt Watch System / Trip Indicaton
SPCIFICATIONS:
· Machine Guard Safety Switchwith added safety feature of rope missing detection
· Rope length: Single Sided Switch: 80 Meters, Double sided switch: Up to 80 Meters each side
· Contact arrangement: 1 NO + 1 NC, 4 NC / 2 NO, 2 NC / 1 NO,
· Contact Rating: 10 Amp resistive at 230 V AC
· Enclosure: Cast Al, Field mounting, Main switch: IP 67, Junction Box: IP 65
· Cable entry for Junction Box: ¾ inch BSP
Machine Guard Safety Switchare field mounting type cane be used in dusty and seashore environment.
SMARTsaa offersMachine Guard Safety Switchequivalent to:
Schmersal / Telemecanique /Allen Bradley /Schneider
We offer Best Price for Machine Guard Safety Switch with fast delivery
We also offer RequiredAccessories for Machine Guard Safety Switch:Like
Pull Cord Cable, Turn Buckle, Wire Rope Thimble (Rope Eye), Pulley, Stay Bolt, spring , Cable Rope Clamp, Bull Dog Clip
SMARTsaaMachine Guard Safety SwitchPrice is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Smartsaa |
Material/Body | Plastic |
Rated Insulation Voltage | 1500 V |
Current Rating | 16 AMP |
Switch Type | Weatherproof |
Usage/Application | Conveyor stopping in case of emergency |
Power/Voltage | 440 V |
Model Name/Number | PC202D |
Features | Snap Action |
Trigger Cable Maximum Length | 30 Mtrs |
Certification | Enclosure Grade |
Utilization Category | Field Mounting, Conveyor Safety |
Distance Between Cable Supports | 5 Mtrs |
Ip Rating | IP 65 |
Rated Impulse Withstand Voltage | 1500 V |
Contact Type | Snap Action, 2 NO + 2NC |
Housing Material | DMC Enclosure |
Country of Origin | Made in India |
Pull Cord Switch with Plastic Enclosure manufactured and exported by SMARTsaa is housed in corrosion resistant Plastic / Polycarbonate enclosure. The switch is designed to stop the conveyor belt in the case of an emergency. It provides contact operation which can be used for conveyor stopping as well as audio visual alarm. 2 NO+ 2 NC contact is provided by Pull Cord Switch with Plastic Enclosure.Pull Cord Switch with Plastic Enclosure is housed in dust and weatherproof plastic enclosure with IP 65 Grade of protection. Sturdy & heavy duty cam-switch with robust contacts is used to give longer service life. Handle fitted with spring steel rings at both ends is provided for fixing the rope. The design of the rings gives maximum flexibility in operating condition. Enclosure is epoxy painted to give high corrosion resistance. The switch is designed with manual reset type of mechanism. Pull Cord switch is mounted on the walkway side of the conveyor belt preferably at about every 30 meters of the length. Rope is tied to the end rings of the handle. When the rope is pulled from any side, the switch is operated. Unless and until the handle is reset to normal position manually, the switch remains in operated condition. Hence reliable operation is ensured by Pull Cord Switch with Plastic Enclosure.
Following models are available:
PC 101 P: Pull Cord Switch with 1 NO + 1 NC contact with Plastic Enclosure
PC 202: Pull Cord Switch with 2 NO + 2 NC contact with Plastic Enclosure
SMARTsaa offers Pull Cord Switch equivalent to:
Schmersal /Telemecanique/Allen Bradley /Schneider/Jayashree / AG & Protocontrol
We offer Best Price for Pull Cord Switch with Plastic Enclosure with fast delivery
All above Pull Cord Switches are field mounting having IP 65 enclosure, available in various other enclosures materials to suite site conditions:
C: Pull Cord Switch in Cast Aluminum enclosure
D: Pull Cord Switch in FRP / DMC / Plastic enclosure
CI: Pull Cord Switch in Cast Iron Enclosure
F: Pull Cord Switch in Flameproof Housing for use in hazardous area
Available Accessories:
PCW: Pull Cord Switch Rope
TS: Pull Cord Switch with Terminal Strip inside the switch
JB: Pull Cord Switch with Junction Box for ease of wiring
MF: Pull Cord Switch with Mechanical Indication
IL: Pull Cord Switch with LED Indicating Lamp for location indicator of operated switch
CG: Cable gland for Pull Cord Switch
BP: Pull Cord Switch with Base Plate
PCA: Addressable Pull Cord Switch
SMARTsaa Pull Cord Switch with Plastic Enclosure Price is affordable and economical.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Smartsaa |
Material/Body | Metal |
Rated Insulation Voltage | NA |
Current Rating | NA |
Switch Type | Accessories |
Usage/Application | Accessories for Safety Pull Cord Switch |
Model Name/Number | SPCA |
Power/Voltage | NA |
Housing Material | SS |
Country of Origin | Made in India |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Smartsaa |
Rated Insulation Voltage | 110 V |
Current Rating | 10 Amp |
Switch Type | Weatherproof, Waterproof |
Usage/Application | Safety Rope Switch for machines |
Model Name/Number | SPCS 202 |
Power/Voltage | 220 V |
Ip Rating | IP 67 |
Cable Entry | 1/2 inch NPT |
Rope length | Up to 120 Meters |
Country of Origin | Made in India |
SMARTsaa is leading Manufacture and Exporter of Pull Cord Switch with Rope Break Detection for use on machines like cutting machines, printing machines and wood working machines for emergency stoppage. To be used with steel wire. The contacts of these switches are to be interlocked such that when switch is operated the machine should stop, protecting human, machines and other vital and machine elements.
Salient Features:
Additional Information: