Smartsaa Instruments (I) Private Limited

SMARTSaa offers most advanced Trip Indicator for Conveyor Monitoring.
 SALIENT FEATURES:

• Easy and instant location of operated safety switch
• Saves precious down tine in locating the operated switch
• Displays exact location of operated switch
• Multiple operated switch displayed by way of scrolling
• Specially developed for conveyor safety and maintenance
• Superior in terms of its essential features, user comfort,
• Can be easily adapted in running plants as no special cable is
• required
• Saves cable cost for upcoming plants
• Multiple type switches ( Pull Cord Switch, Belt Sway switch, ZSS)
• can be wired in single loop and still you get separate contact O/P

CONVENTIONAL OPERATION OF SAFETY SWITCHES

Conventionally safety switches are installed at 30 Meter distance on aconveyor. If any of the installed safety switches is actuated, there wasnot any provision for the exact identification of location and status ofsafety switch in control room. Operator has to rush at field for detectionof safety switch to check and locate the actuated switch or any cablefault. In this process there were losses in production, time, money andsometimes life also.

SMART ADDRESSABLE WAY OF WIRING SAFETY SWITCHES
To make ordinary safety switch addressable

Trip Indicator Unit consists of :

Display Unit (Trip Indicator or Master unit) located in control roomCommunication Cards: To be mounted in each safety switch

When any safety switch gets operated, conveyor will trip INSTANTLY and signal sent to the Trip Indicator from where TRIP relay o/p is generated. The operated switch number is displayed and communicated to PC/ PLC as per requirement.

TRIP INDICATOR UNIT MODELS:

Trip Indicator : TRA ( Popular and economical nodel )Trip Indicator : TRS (Sophisticated model with added features)
TRA MODEL:These models are auto addressable type and requires termination module at the end of loop for proper functioning. Auto addressing One common trip indicator unit for multiple loops/ groups/conveyors etc are also possible Without hampering any safety of major functionality since Individual loop operation is independent.

SMARTsaa offers Inductive Speed transmitter with analogue O/P for Monitoring continuous speed forfurther processing instead of switching O/P. These analog output Inductive Speed transmitter give 0-10Vdc / 4-20 mAmp output with respective Speed. No need of separate control unit. The sensor andcontrol circuit is housed in sensor housing (IP 67). It is simple, cost effective and easily mountable at site.Features:• Completely sealed compact housing• Suitable for outdoor use and in wash down areas• Continuous speed detection• LED indicators for instant visual confirmationApplications:• Bucket Elevators• Bulk material handling conveyors• Chemical processing• Conveyor systems• Food processing• Mining Equipment• OEM applications• Paper Manufacturing• Power Plants• Recycling EquipmentWorking:The sensor (Inductive Type) and control unit are housed in sensor housing. Sensor is placed in closeproximity of the rotating object. On this object, metallic plates are fixed. Sensor detects presence ofmetal objects which come within the range of their oscillating field giving rise to corresponding pulses.These pulses are fed to the control unit to sense the speed.This Inductive Speed Transmitter continuously monitors speed, and generates analogue output (4-20mAmp / 0-10 VDC) with respective speed.This transmitter does not have switching output & no ITD facilitySPECIFICATIONS: SMARTsaa IST B2Duty : Speed MonitoringOutput : Analog Voltage output 0-10 VDC, Current Output 4-20 mAmpAux. Supply : 24 V DCEnclosure : Sensor and control unit housed in sensor housing M 30, IP 67Load Current : 100 mA, suitable load is to be connected as per the connection diagramSpeed Range : 10-100 RPM, other speed ranges also availablePulses/Rotation : 4 PPR (Please specify if other)Cable : Three cores (DC Models)Enclosure : Ni Nickel Plated brass, non Flush mountingInductive Type, M30, with 2 Meter, 3 core , PVC ,cable, Sensing Range 10-12 mm, Effective: 7-10 mm

SMARTsaa offers Miniature Inductive Speed transmitter with analogue O/P for continuous speed monitoring of rotating equipment. These analog output Inductive Speed transmitter give 0-10VDC / 4-20 m Amp output with respective Speed. No need of separate control unit. The sensor and control circuit is housed in sensor housing (IP 67). It is simple, cost effective and easily mountable at site.

 

·       Completely sealed compact housing

·       Suitable for outdoor use and in wash down areas

·       Continuous speed detection

·       LED indicators for instant visual confirmation

Applications:

·       Bucket Elevators                                               

·       Bulk material handling conveyors

·       Chemical processing

·       Conveyor systems

·       Food processing

·       Mining Equipment

·       OEM applications

·       Paper Manufacturing

·       Power Plants

·       Recycling Equipment

Working:

The sensor (Inductive Type) and control unit are housed in sensor housing. Sensor is placed in close proximity of the rotating object. On this object, metallic plates are fixed. Sensor detects presence of metal objects which come within the range of their oscillating field giving rise to corresponding pulses. These pulses are fed to the control unit to sense the speed.

This Inductive Speed Transmitter continuously monitors speed, and generates analogue output (4-20 m Amp / 0-10 VDC) with respective speed.This transmitter does not have switching output & no ITD facility

SPECIFICATIONS: SMARTsaa IST B2

Duty                : Speed Monitoring 

Output             : Analog Voltage output 0-10 VDC, Current Output 4-20 m Amp

Aux. Supply      : 24 V DC

Enclosure         :  Sensor and control unit housed in sensor housing M 30, IP 67

Load Current  : 100 mA, suitable load is to be connected as per the connection diagram 

Speed Range  :  10-100 RPM, other speed ranges also available

Pulses/Rotation     :  4 PPR (Please specify if other)

Cable               :  Three cores (DC Models)

Enclosure         :  Ni Nickel Plated brass, non-Flush mounting

Inductive Type, M30, with 2 Meter, 3 core , PVC ,cable, Sensing Range 10-12 mm, Effective: 7-10 mm